At those times, try to observe anything the paper is touching as you remove it-it is relatively easy to generate sufficient force to knock a sensor flag out of position.ĪLL COPIERS AND PRINTERS-sense jams this way….X amount of time to be picked up from the tray, and arrive at it’s first check point, and from there, to it’s next check point. It will not always be possibly to do this. Yes, I know this seems like it takes far longer than simply yanking out the offending piece, But you won’t be left without a printer because of a scrap floating around inside.AND MOST IMPORTANTLY,Always attempt to remove paper in the same direction it was travelling. If the paper begins to tear STOP, try to re-grip closer to the nip (where the two rollers meet) of the rollers, and try again. 2)….grab any piece of paper to be removed using BOTH HANDS,-pull EVENLY with both hands, steady pressure. Always do the following at jam-time: 1) If your unit gives a sequential removal/clearing tutorial, follow it. It’s also used as a “kitchen drawer” descriptor for anything short of software, print head or other circuity issues. A “paper jam”, in most home printers, does not necessarily mean that verbatim. Typically, a small scrap of paper will come to rest at or near a sensor or a sensor arm (also called a flag). No printing device has a capability to “absorb” a stray scrap of paper. General advice on ALL copier/’printer jams…a WHOLE piece of paper in should equal a WHOLE piece of paper out.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |